TOPAZ and ONYX inverters manufactured by ONYX are recognized as the industry standard for critical telecom power. Delivering peace of mind in critical environments, Topaz inverters are repeatedly selected by customers that have come to realize that the small premium is a very small cost for guaranteed reliability

 

Topaz®S3 500 VA, 1 KVA, 2 KVA
 

 

 

 

 

 

The Topaz®S3 Inverter is known as the industry standard inverter for critical environments such as the telecom and data center industry. Specified by most major telecom providers and equipment manufacturers the S3 earned it’s reputation through many years of failsafe operation in the field.

Built for noise sensitive DC environments: DC noise filtering circuits on the Topaz S3 practically eliminate ripple current (<30 dBNRC and less than 2mV psophometric), a by product of most inverters that leads to microcycling and can potentially damage even large DC battery banks. Additional noise filters regulate both conducted and radiated EMI to eliminate disruptive noise interference avoiding disturbances to other sensitive equipment.

Heavy duty fault and overload withstand: The Topaz S3 is constructed to withstand high output faults, surges and overloads without damaging the inverter. Fault currents are routed through a fast acting SCR based static bypass that can accommodates overloads many times the inverters nominal rated current.

True Hot Swap Technology: The Topaz S3 is housed in a draw-out receiver cabinet with an integrated maintenance bypass switch allowing the inverter to be swapped out with no risk of interruption to the critical load. The swap-out procedure is inherently safe with the bypass activating a seamless transfer when the inverter is removed.

 

TOPAZ S4 3.5-21 KVA N+1

 

 

 

 

The Topaz S4 N+1 scalable DC to AC inverter is used by most large telecom providers as well as anyone looking for the highest grade of critical AC power from a DC power plant.

Scalable 3.5 kVA power modules can be added in a N+1 redundant
configuration up to 21 kVA making the S4 ideal to deal with future power requirements.

S4 inverter modules are packaged into a “hot swap” receiver cabinet that allows anyone to safely replace or add modules without interruption to the critical load.

Available as a complete power system, the S4 can be packaged with AC distribution and external maintenance bypass in an open frame relay rack.

 

 

ONYX S5 3.5-21 KVA N+1


 

The ONYX S5 uses high density circuitry to provide 1500 Watts o W f power into a slim 1U rack mountable enclosure.

The Ultimate in Scalability: The ONYX S5 can be paralleled for capacity or redundancy using the "plug and play" synchronization cables. No external circuitry is required. In excess of 20 units can be paralleled for capacity.

Single Phase / Three Phase / Split Phase: The S5 can be configured for single phase, split phase or three phase output. For three phase output, the S5 can be configured in groups of three inverters (either parallel or single module groups). Applications requiring split phase outputs (i.e. 208 V and 120 VAC out) are addressed using the split phase output converter module.



 

INVERTER DATASHEETS

TOPAZ S3 - 500 VA, 1 KVA, 2 KVA INVERTER

TOPAZ S4 - 3.5 to 21 KVA N+1 INVERTER

ONYX S5 - 1.5 KVA N+1 INVERTER

 
 

 
Vigilant Power Solutions, Inc.